How to make a turtle rockery?
Turtle rockery rockery is currently a focus of attention of many people. Many rockery rocks in our lives are piled with turtle stone rock. So what are the foundations for making rocky rockery rock? The following description of the turtle stone manufacturers.
1.Bottom of the pool
In order to ensure that there is no water leakage, it is better to choose waterproof concrete, equip steel bars together, and perform reinforcement calculation together. Expansion joints and subsidence joints should also be considered for large turtle rock rockeries and labradorite rockery ponds. These structures must have waterstops and be filled with flexible leak-proof materials.
The structure of the pool wall mainly plays a maintenance effect. It is required to prevent water leakage and is similar to the connection of the retaining wall. The outer wall of the air and the inner wall have the same internal practices as the bottom of the pool and are poured into the bottom of the pool as a whole.
It is used to strengthen the divide line of the pool and make the structure of the pool more stable. When the stone is used to press the roof, because of its limited length of picking, the link with the wall is relatively forked, and the use of reinforced concrete to press the roof has good integrity. There is another method, the plastic stone pressing type, which uses artificial stone to characterize the pool top, which can not only conform to the rocky mountain body, but also better handle the shape of the pool top.
The water source of the pool is generally artificial water source. In order to fill or replenish the water, an inlet should be set. The inlet can be planned generously, and it can also be set in a hidden place or a concealed rockery.
To facilitate sorting, maintenance and avoiding water erosion or freezing when the water is not in use, the pool cherry has a drain. The water tank should be drained by gravity as far as possible. The suction port of the pump can also be used as the drain port, and the pump can be used to drain water. The inlet of the drain outlet should be provided with a grid or grid, and its grid space and grid diameter should be no more than 25% of the diameter of the pipe. Of course, it can also be determined based on the gap of the pump impeller.
6, overflow port
In order to avoid overflowing the water from the top of the pool to the ground, and to control the water level in the pool, the overflow outlets commonly used are funnel type, nozzle type, connection type, etc., which can also be selected according to specific conditions. If a large water tank can not meet the requirements, a number of overflow ports can be provided, but they should be evenly arranged in the water tank. The orientation of the overflow port should not affect the beauty, and it is easy to clean up the dirt and clear the pipes. A grid and grid should be set outside the overflow to avoid large floating objects blocking the pipeline.
The above are the basic contents of the turtle rockery, which I hope to help you. If you want to know other aspects, you can come to consult us, we will have professionals to answer your questions.